Chinese dental n type autoclave for dental clinic

N class autoclave comply with international standards and regulations for sterilization efficacy and safety. The design meets the requirements of EN 13060 and other relevant standards.

N Class Autoclave Chamber Size

N class autoclave are available in various chamber sizes to accommodate different loads. Typical chamber sizes range from small tabletop units to large floor-standing models.

N Class Autoclave Sterilization Temperature

N class autoclave typically operate at temperatures ranging from 121°C to 134°C (250°F to 273°F). These temperatures are sufficient to achieve sterilization according to recommended guidelines.

N Class Autoclave Sterilization Time

The load size, type of materials being sterilized, and the specific autoclave model can vary the sterilization cycle time. Standard cycles usually range from 15 to 30 minutes, with additional time for heating up and cooling down.

Sterilization Pressure

Dental autoclave typically operate at a pressure of around 1.1 to 2.1 bar (15 to 30 psi) during the sterilization process. This pressure is necessary to maintain the steam at the required temperature for effective sterilization.

Control System

N class autoclaves have control systems that allow for precise monitoring and adjustment of sterilization parameters such as temperature, pressure, and cycle time. Some models may feature advanced touchscreen interfaces for user-friendly operation.

Safety Features

Dental autoclave include various safety features to prevent accidents and ensure proper operation. These may include pressure and temperature sensors, automatic shut-off mechanisms, door interlocks, and alarms for detecting abnormalities.

Construction Material

Manufacturers typically construct autoclaves from stainless steel to ensure durability and resistance to corrosion. They design the chamber and door seals to maintain pressure and prevent steam leakage during the sterilization process.

Water Supply

Dental autoclave require a water supply for generating steam. Some models feature built-in water reservoirs, while others may need to be connected to an external water source.

Power Requirements

This autoclaves operate on electrical power and may require single-phase or three-phase power depending on the model and size. The power requirements vary depending on factors such as chamber size and heating capacity.